test me

Site Search:

ICND1 and ICND2 break down

The content is migrated from friend site kl2217.wordpress.com.
If you haven't decided what CCNA test to take, read this post first.

The author created this free CCENT and CCNA study guide by collecting various free multimedia resources from the network, including a lot of youtube videos. Also check out the CCNA Lab for the labs corresponding to this tutorial, and verify your knowledge with pre-make Practice Exams .

Do It Yourself (DIY) is the best way of learning TCP/IP network, therefore, I highly recommend you to download wireshark and packet tracer. With wireshark, you can capture your network traffic and see exactly what's going on under the hood; with packet tracer, you can set up LAN and WAN virtually and do experiments on them.

Whenever you need to learn more about a CCENT and CCNA key word, use the Site Search at the upper left conner.

Good luck with your CCENT and CCNA test!

(CCENT – ICND1)

Lesson 1
Introduction to Networking and the Networking Models


Cover the theory needed for the exam, to accelerate Cisco networking career and for troubleshooting experience

What is A Network
The OSI Model
The Data Transmission Process
The TCP/IP Model
TCP And UDP
IP and ICMP protocols
Ports, Sockets and Port Numbers
TCP/IP Applications
Network Topology

Lesson 2
Ethernet Standards and Cable Types


The CCNA Exam will Hammer You with Questions About Ethernet... so this course breaks down everything you need to know about cable types. this is also crucial for setting up and running a network in the real world.

What is a LAN
Ethernet Types And Standards
The Need For And Operation of CSMA/CD
Ethernet Frame
Ethernet Addressing
Host-to-Host Communication
Ethernet Connectors and Cable Types
Pins And Transmissions
Crosstalk

Lession 3
Switching


I Explain How (and WHY) Switches Work... in theory, for real world application and for the exam.

Ethernet LAN Segments
Repeaters, Hubs, Bridges, Switches and Routers
MAC address learning and filter/forward decisions
Frame Processing Methods
Virtual LANs
Cisco Three-Layer Switching Model
Introduction to STP
Basic Switch Security

Lesson 4
Common Router and Switch Commands


Typical Switch (And Router) Commands are Broken Down. This information is necessary both on exam day and also when working in the real world as a network admin, as these commands are used daily.
Video Lab - Packet Tracer Interface Overview
Physical Connections and Passwords
Cisco IOS software overview
Physical Side of Cisco Switches
User, Enable and Privilege Modes
Basic Switch managment commands
Switch/Router passwords configurations
Telnet and SSH
Switch Port Security Defaults, Options and Configurations
Banners“logging synch”, and “exec-timeout”
Keystroke Shortcuts and Manipulating History

Lesson 5
IP Addressing and the Routing Process


This section covers must know (and memorize) fundamentals, which are needed for the exam and necessary for future videos: binary math, subnetting, and working with network and port address translations.

IP Addressing and Binary Conversions
IP Address Classes
Private IP Address Ranges
CIDR network address
Intro to the Routing Process
Routing Process Continued -- Behind the "PING"
* Routing Protocols
Basic Router management commands
Switch/Router Interfaces and Physical Ports

Lesson 6
ARP, DNS and DHCP


This section will teach you these fundamental protocols which are necessary for use within any network.

DNS Process
The ARP RARP and DHCP Process
Broadcast, Multicast, and Unicast
Intro to Security Device Manager (SDM)

Lesson 7
Memory Components and Config Files


This video introduces the student to basic password and security configurations, as well as assigning privilege levels; so, it's really the foundation for their knowledge of router security as well as the basic password recovery process.

ROM, RAM, NVRAM, And Flash
The Boot Process
Setup Mode
Configuration Files and IOS Upgrading
The Configuration Register

Lesson 8
Intro to Wireless Networks (WLANs)


Learn the standards of wireless, which relates to all wireless, not just Cisco.  This is the fastest evolving and growing field.  It’s also necessary to memorize this information for the exam.

Wireless LAN overview
Wireless Standards
Spread Spectrum
Antena Types
CA vs. CD
SSID, MAC Address Authentication, WEP, WPA, and WPA2

Lesson 9
Binary Math and Subnetting


Fundamentals for the exam.  Also, essential for IP addressing and IP address conservation. #1 topic that causes otherwise well prepared students to fail CCNA.

Decimal > Binary, Binary > Decimal
Subnetting Basics
Four common subnetting scenarios

Lesson 10
Static Routing and RIP – Part 1


More fundamentals for the exam, and you will see the work done over a Cisco router. You will learn how to manually set up routing. This video will pave the way for future exam and real world success.

Static Routing Theory
Floating Static Routing
RIP Routing Theory
Video Lab -Static Routing and RIP Routing

Lesson 11
Wide Area Networks (WANs)


Learn to link routers with other routers for communication.

What is a WAN
Physical Side of WANs
WAN interface of Cisco Router and WAN Cabling
HDLC and PPP
Intro to Frame Relay
NAT and PAT
* NAT overloading Example
Video Lab - Internet Connections with NAT and PAT
Video Lab - Router as DHCP Server
Intro to ATM
Modems and DSL Variations
WAN Trouble-shooting

Lesson 12




Introduction to Network Security


You will learn about network attackers and intruders, how they get in, and how to keep your network save by keeping them out.

The need for network security
Classes of Hacker Attacks
Firewalls and Proxy Servers
The Attacker’s Arsenal
Intro to PIX, ASA, IDS, and IPS
Viruses, Worms, and Trojan Horses
Preventing Virus Attacks

Lesson 13
Troubleshooting


95% of work in the real world is troubleshooting, so it’s necessary for real world success.

Cisco Discovery protocol (CDP)
L1 and L2 Troubleshooting
Telnet and SSH Maintenance Commands
* Administrative Distance
Extended Ping and Traceroute

(ICND2)

Introduction to ICND2




* Videos Introduction
* Instructor’s Introduction
* Exam Types



Lesson 1
Switching II





Switch Basic Concept Review
* STP
* Root Bridges, Root Ports, and Designated Ports
* STP Timers and Port States
* Portfast
* VLANs and Trunking
* Access and Trunk Port Comparison
* VTP
* “Router on a Stick”
* RSTP and PVST
* Etherchannels



Video 2
PTP WAN Links, HDLC, PPP, and Frame Relay


This will help you when working on real production networks. All topics are shown being configured on live equipment.  Frame Relay is a major topic on the exam and in the real world.

* HDLC vs. PPP
* PPP Features
* PAP and CHAP
* Frame Relay Introduction
* Frame Relay LMI Theory
* Frame Relay Configs, DLCIs, Frame Maps, and Inverse ARP
* Frame Sub-Interfaces3
* Split Horizon
* Frame Relay LMI Show, Debug, and Lab
* FECN, BECN, DE bits
* PVC Status Meanings



Lesson 3
Static Routing and RIP


This video expands on the CCENT video, covering advanced topics found on the ICND2 and in the real world.

* Static Routing Theory and Configuration
* Distance Vector Protocol Behavior – Split Horizon and Route Poisoning
* RIP Theory and Version Differences
* The Joy of “show ip protocols”
* RIP Limitations
* RIP Timers
* Floating Static Routes



Lesson 4
OSPF


OSPF is an Internet protocol.  In this video you will look at types of OSPF and how to configure on a live network.  Experience with OSPF is necessary for the CCNA, for the real world, and to build upon for CCNP & CCIE.

* Link State Routing Protocol Concepts and Basics
* The DR and BDR
* Hello Packets
* Troubleshooting Adjacency Issues
* Hub-and-Spoke NBMA OSPF Networks
* Broadcast Networks
* The OSPF RID
* OSPF Router Types
* Advantages of OSPF
* Point-to-Point OSPF Networks
* Default-Information Originate (always?)
* OSPF Authentication



Lesson 5
EIGRP


Learn the theory and practice with labs to learn this hybrid routing protocol which has increased operational efficiency from it predecessor. Learn the capabilities and attributes.

* Introduction to EIGRP
* Successors and Feasible Successors
* EIGRP vs. RIPv2
* Basic Configuration
* Wildcard Masks
* Load Sharing (Equal and Unequal-cost)
* EIGRP, RIPv2, and Autosummarization
* Passive vs. Active Routes



Lesson 6
IP Version 6 and NAT


Learn the basic theory and routing protocol.  You will need to know the basics for the CCNA exam and for working with networks.  IP Version 6 is everywhere and becoming more prevalent, so understanding this material is vital for future success.

* IPv6 Theory and Introduction
* Zero Compression and Leading Zero Compression
* IPv6 Reserved Addresses
* The Autoconfiguration Process
* OSPF v3 Basics
* Transition Strategies
* NAT Theory and Introduction
* Static NAT Configuration
* Dynamic NAT Configuration
* PAT Configuration



Lesson 7
VPNs and IPSec


Learn key terminology & definitions for the exam.

* Definitions and Tunneling Protocols
* Data Encryption Technologies
* Key Encryption Schemes
* IPSec, AH and ESP
* A VPN in Your Web Browser



Video 8
ACLs and Route Summarization


Learn to configure and control ACLs to get them to do what you want for the exam and in the real world.   Learn the basic breakdown and how to summarize routes. Learn common commands for working with RIP & EIGRP.

* ACL Login and the Implicit Deny
* Standard ACLs and Remarks
* “Host” and “Any”
* The Order of the Lines
* Extended ACLs
* Named ACLs
* Telnet Access, Placing ACLs, and Blocking Pings
* Dynamic and Time-Based ACLs
* Port Number Review
* Route Summarization with RIP and EIGRP

See also 640-822 ICND1 Exam Topics (Blueprint)












4 comments:

  1. Great,good materials!!!

    But ,as I know there no VLAN, Frame Relay,ATM on 640-822 ICND1 exam.

    Also,when (ICND2) are going to be ready?:)

    ReplyDelete
  2. There are VLAN commands test for ICND1, so ... For the ICND2, it may not be ready recently, :-(

    ReplyDelete
  3. ahhhh this page is soo good thank your....studying for my icnd1 ftw

    ReplyDelete